Use Denatured Alcohol, Acetone, Rubbing Alcohol (isopropyl alcohol) or Lacquer Thinner to clean tools and mixing surface before PC-7® cures.Ĭlean hands and skin with soap and water.Ĭured epoxy can be removed by applying Paint Remover or Paint Stripper to soften the epoxy surface. How to clean-up after PC-7 Epoxy Paste application Smooth, glossy and shiny surfaces should be scuffed using sandpaper to increase adhesion. If there is a concern of the paint’s adhesion then remove it with sandpaper or wire brush. Remove rust and loose paint with sandpaper or wire brush. Do not use Mineral Spirits or Paint Thinner for removing contaminants. Use a clean paper towel or rag for wiping. Mild detergent solution in water is also good removing contaminants. Remove contaminants such as dust, dirt, oil and grime with solvents such as Denatured Alcohol, Acetone, Rubbing Alcohol (isopropyl alcohol) or Lacquer Thinner. How to prepare a surface for bonding with PC-7 Epoxy Paste
0 Comments
Leave a Reply. |